大众彩票大众彩票 specializes in R&D and production of laminated Film / PET film / CPP film granulating line manufacturers and suppliers.
大众彩票 specializes in R&D and production of laminated film / PET film / CPP film granulating line manufacturers and suppliers.
1.High efficiency
大众彩票Compared with the primary design,the output of PURUI second generation film pelletizing machine has been increased 20%.
2.Low power consumption
The power consumption reduced 15% compared with the primary design,.
3.Highly automatically
Only 2 people for one film granulating line.
Applicable plastic materials: laminated Film, PET film, CPP film, etc
Material shapes: film, bag, , non woven fabric, crushed material(PE, PP)
Material types: (rolls, loose, bundled),
Material comes from offcut,defective film and washed film.
Note: depending on different material properties, various downstream equipments are needed.
Normal:
| Model | ML85 | ML100 | ML130 | ML160 | ML160-Ⅱ |
| Output(kg/h) | 120-200 | 200-400 | 400-650 | 600-1000 | 800-1200 |
High output, low consumption:
| Model | ML85B | ML100B | ML130B | ML160B | ML180B |
| Output(kg/h) | 200-350 | 400-550 | 600-800 | 800-1200 | 1000-1500 |
bopp film→belt conveyor→compactor→mother extruder →hydraulic screen changer →baby extruder→hydraulic screen changer →pelletizing system →air transmission →silo storage
Feed film on the Belt conveyor machine and go into Compactor for cutting, heating, compacting and mixing, then enter the film granulating machine for extruding.
Feed regrind material through the Spiral charger and Feeder on the extruder.
大众彩票Instruction: the film and regrind material can be recycled separately or together, depending on customers’ different needs.
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Compactor / Agglomerator
The rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.
Noodle Cutter Strand Type Cutting System
The length of the sink is 4 meters, which can be adjusted up and down, and the stainless steel pipe is designed to change water.
大众彩票
The sink is made of 2mm thick stainless steel plate.
大众彩票Click to watch the complete HD video of the
